| STAN | |
CORP |
|
|
| STAINLESS STEEL CUT COMPOUND: | |
| Uses | Buffing operations on steel and stainless steel. |
| Composition | The prime abrasive is Fused Aluminum Oxide. High temperature fusion of naturally occurring bauxite in conjunction with selective particle size, determines the degree of finish obtained. Note that Buff selection is also critical in achieving a desired finish. |
|
HIGH COLOR COMPOUND: |
|
| Uses | Cut and Color or Coloring on all metals. |
| Composition | Super highly refined calcined aluminum oxides combined with proprietary binders. |
RED ROUGE COMPOUND: |
|
| Uses | Coloring on gold, silver, brass, and other non-ferrous metals. Coloring is defined as attainment of a high degree of luster and polish on the metal surface. |
| Composition | Non-ferrous metals; Red iron Oxide Rouges Chrome and Nickel; Chrome Rouges steel, Aluminum and Zinc; Oxide Green Rouges. |
BELT GREASE COMPOUND: |
|
| Uses | Lubricating polishing wheels and abrasive belts to prevent loading or glazing. |
| Composition | Heavy duty to light duty lubricants with high to low melting points and hard to soft/oily make up. |
TRIPOLI COMPOUND: |
|
| Uses | Removing scratches, pit marks, pin holes and other surface imperfections from non-ferrous metals and plastics. |
| Composition | Tripoli is a naturally occurring abrasive found in the Southwestern United States. Its structure is a mixture of both amorphous and crystalline architecture. |
CHROME AND COLORING COMPOUNDS: |
Uses | Buffing to achieve a luster on chrome plating and all non-ferrous metals. Available grades range from light cut and color to mirror finish. Light cut and color achieves high luster with less cut than Tripoli. For highest luster mirror finish grades are employed after using Tripoli. |
| Composition | Calcined Aluminum Oxides of various hardness and particle sizes is produced from natural bauxite at high, carefully controlled temperature. |
PLASTIC COMPOUNDS: |
|
| Uses | Coloring and removal of scratches, pin holes, pits, and other surface imperfections on plastics, synthetics, laminates, and hard rubbers (both natural and artificial). |
| Composition | Heavy duty cutting to light cut plus mirror finishes. |
GREASELESS COMPOUNDS: |
|
| Uses | Satin finishing, light polishing and light deburring. |
| Composition | Special adhesives combined with aluminum oxide and/or silicon carbide. |